ANALISIS KEKUATAN TARIK KOMPOSIT HYBRID BERPENGUAT SERAT BATANG PISANG KEPOK DAN SERAT PINANG
Abstract
Composite is a material consisting of two or more types of constituent materials with different characteristics and properties from each other, both physical and chemical properties. This study aims to determine the effect of the volume fraction of kepok banana stem fiber (Musa Paradisiaca) and areca fiber (Areca catechu L) on the tensile strength of hybrid composites. The results of the highest density test were found in the volume fraction of 15% banana kepok fiber: 15% areca nut fiber, which was 1.17 g/cm3, and the lowest was in the 20% volume fraction of kepok banana fiber: 10% areca nut fiber of 1.10 g/cm3. The results of the tensile test of the composite obtained the highest tensile strength at 15% volume fraction of banana kepok fiber: 15% areca nut fiber at 16.33 MPa, and the lowest at 0% volume fraction of kepok banana fiber: 30% betel nut fiber at 5.81 MPa.
Keywords
Full Text:
References
N. U. R. Burhan, “Analisis Pengaruh Sambungan Mekanik Tipe Single Lap Terhadap Kekuatan Tarik Pada Komposit Polyester Serat Batang Pisang,” pp. 1–10, 2015.
F. Paundra, T. Triyono, and W. P. Raharjo, “Cu Addition Effect Analysis on Matrix Of Remelting Piston Aluminium Composite with Silica Sand Reinsforcement to The Impact Strength and Micro Structure on Aluminuim Matrix Composite Using Stir-Casting Method,” Mek. Maj. Ilm. Mek., vol. 16, no. 1, pp. 20–25, 2017, doi: 10.20961/mekanika.v16i1.35051.
M. Syaukani, F. Paundra, F. Qalbina, I. D. Arirohman, and P. Yunesti, “Desain dan Analisis Mesin Press Komposit Kapasitas 20 Ton,” pp. 29–34, 2021.
T. Djunaedi and B. Setiawan, “Pengujian Kekuatan Tarik Komposit Variasi Arah Serat Roving – Resin Polyester Bqtn R157 Yang Diproduksi Dengan Metode Vacuum Bagging Untuk Aplikasi Pesawat Tanpa Awak,” Semin. Nas. Sains dan Teknol., pp. 1–10, 2018.
D. Ariawan, T. S. Rivai, E. Surojo, S. Hidayatulloh, H. I. Akbar, and A. R. Prabowo, “Effect of alkali treatment of Salacca Zalacca fiber (SZF) on mechanical properties of HDPE composite reinforced with SZF,” Alexandria Eng. J., vol. 59, no. 5, pp. 3981–3989, 2020, doi: 10.1016/j.aej.2020.07.005.
R. Muthalagu, J. Murugesan, S. Sathees Kumar, and B. Sridhar Babu, “Tensile attributes and material analysis of kevlar and date palm fibers reinforced epoxy composites for automotive bumper applications,” Mater. Today Proc., vol. 46, no. xxxx, pp. 433–438, 2021, doi: 10.1016/j.matpr.2020.09.777.
N. Nopriantina and A. -, “PENGARUH KETEBALAN SERAT PELAPAH PISANG KEPOK (Musa paradisiaca) TERHADAP SIFAT MEKANIK MATERIAL KOMPOSIT POLIESTER-SERAT ALAM,” J. Fis. Unand, vol. 2, no. 3, pp. 195–203, 2013, doi: 10.25077/jfu.2.3.
M. P. Artika and A. Mahyudin, “Pengaruh Persentase Serat Pinang terhadap Sifat Mekanik dan Biodegradabilitas Komposit Polipropilena dengan Penambahan Pati Pisang,” J. Fis. Unand, vol. 8, no. 2, pp. 158–163, 2019, doi: 10.25077/jfu.8.2.158-163.2019.
A. J. Adeyi, O. Adeyi, E. O. Oke, O. A. Olalere, S. Oyelami, and A. D. Ogunsola, “Effect of varied fiber alkali treatments on the tensile strength of Ampelocissus cavicaulis reinforced polyester composites: Prediction, optimization, uncertainty and sensitivity analysis,” Adv. Ind. Eng. Polym. Res., vol. 4, no. 1, pp. 29–40, 2021, doi: 10.1016/j.aiepr.2020.12.002.
Z. D. Zulkifli Ida Bagus, “Analisa Pengaruh Perlakuan Alkalisasi Dan Hydrogen Peroksida Terhadap Kekuatan Mekanik Komposit Serat Sabut Kelapa Bermatriks Epoxy,” J. POLIMESIN, no. Vol 17, No 1 (2019): Polimesin, pp. 41–46, 2019, [Online]. Available: http://e-jurnal.pnl.ac.id/index.php/polimesin/article/view/844.
S. Sakuri, E. Surojo, D. Ariawan, and A. R. Prabowo, “Investigation of Agave cantala-based composite fibers as prosthetic socket materials accounting for a variety of alkali and microcrystalline cellulose treatments,” Theor. Appl. Mech. Lett., vol. 10, no. 6, pp. 405–411, 2020, doi: 10.1016/j.taml.2020.01.052.
C. putri Kusuma kencanawati, I. K. Gede Sugita, N. Suardana, and I. W. B. Suyasa, “Pengaruh Perlakukan Alkali terhadap Sifat Fisik, dan Mekanik Serat Kulit Buah Pinang,” J. Energi Dan Manufaktur, vol. 11, no. 1, p. 6, 2018, doi: 10.24843/jem.2018.v11.i01.p02.
I. G. P. A. Suryawan, N. Suardana, I. K. Suarsana, I. P. Lokantara, and I. K. J. Lagawa, “Kekuatan Tarik dan Lentur pada Material Komposit Berpenguat Serat Jelatang,” J. Energi Dan Manufaktur, vol. 12, no. 1, p. 7, 2019, doi: 10.24843/jem.2019.v12.i01.p02.
A. Kadir and K. Hijau Bumi Tridarma Andounohu Kendari, “DINAMIKA Jurnal Ilmiah Teknik Mesin PENGARUH POLA ANYAMAN TERHADAP KEKUATAN TARIK DAN BENDING KOMPOSIT BERPENGUAT SERAT BAMBU,” vol. 6, no. 1, pp. 9–18, 2014.
R. R. Rizkiansyah and I. Purnomo, “Sifat Mekanik Komposit Polipropilena Berpenguat Serat Sansevieria Unidirectional,” Mesin, vol. 25, no. 2, pp. 73–82, 2016.
I. P. Lokantara, N. Putu, G. Suardana, and I. M. G. Karohika, “Pengaruh Panjang Serat pada Temperatur Uji yang Berbeda Terhadap Kekuatan Tarik Komposit Polyester Serat Tapis Kelapa,” vol. 4, no. 2, 2010.
A. A. Ansari, S. K. Dhakad, and P. Agarwal, “Investigation of mechanical properties of sisal fibre and human hair reinforced with epoxy resin hybrid polymer composite,” Mater. Today Proc., vol. 26, no. xxxx, pp. 2400–2404, 2019, doi: 10.1016/j.matpr.2020.02.513.
A. S. N, W. Sumbodo, and R. D. Widodo, “Pengaruh Anyaman 2D Triaxial Braided Fabric Filler Kain Goni Terhadap Kekuatan Bending Dan Struktur Makro Komposit Bermatrik Polyester,” J. Kompetensi Tek., vol. 10, no. 2, pp. 46–53, 2018, doi: 10.15294/jkomtek.v10i2.16027.
A. Saidah, S. E. Susilowati, and Y. Nofendri, “Pengaruh Fraksi Volume Serat Terhadap Kekuatan Mekanik Komposit Serat Jerami Padi Epoxy Dan Serat Jerami Padi Resin Yukalac 157,” J. Konversi Energi dan Manufaktur UNJ, pp. 96–101, 2018.
A. Chandra and A. Asroni, “Pengaruh Komposisi Resin Poliyester Terhadap Kekuatan Bending Komposit Yang Diperkuat Serat Bambu Apus,” Turbo J. Progr. Stud. Tek. Mesin, vol. 4, no. 2, pp. 41–46, 2017, doi: 10.24127/trb.v4i2.68.
D. Sriwita and A. -, “Pembuatan Dan Karakterisasi Sifat Mekanik Bahan Komposit Serat Daun Nenas-Polyester Ditinjau Dari Fraksi Massa Dan Orientasi Serat,” J. Fis. Unand, vol. 3, no. 1, pp. 30–36, 2014, doi: 10.25077/jfu.3.1.
X. B. Zhang, H. Aljewifi, and J. Li, “Failure Mechanism Investigation of Continuous Fibre Reinforced Cementitious Composites by Pull-out Behaviour Analysis,” Procedia Mater. Sci., vol. 3, pp. 1377–1382, 2014, doi: 10.1016/j.mspro.2014.06.222.
DOI: https://doi.org/10.30591/nozzle.v11i1.3122
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution 4.0 International License.
