PENURUNAN DROP TEGANGAN PENYULANG 20 KV DENGAN METODE PECAH BEBAN

Roby Ramadhan; Dicky Lesmana; Zuraidah Tharo

doi:10.30591/polektro.v13i2.6849

PENURUNAN DROP TEGANGAN PENYULANG 20 KV DENGAN METODE PECAH BEBAN

Roby Ramadhan, Dicky Lesmana, Zuraidah Tharo

Abstract

The electricity distribution system is essentially a process of delivering electricity from power generation systems to electricity consumers through a 500/150/70 kV Transmission Network to electricity consumers at 20 kV or 220/400 V. The electricity distribution process begins from the output of the 20 kV substation to the consumers. The distribution of electricity when it exits the substation will pass through feeders. Feeders are the pathways for distributing 20 kV of electricity to distribution substations. Feeders are one of the most crucial parts of the electricity distribution process. As the customer load increases and the length of the lines on each feeder, it can cause an increase in current load and voltage drop. According to SPLN 72: 1987 regulations, in medium voltage networks, the spindle configuration voltage drop limit is 2% of the operating voltage. Therefore, feeders experiencing voltage drops must implement feeder splitting methods to reduce voltage drops at the end of the line. By implementing load splitting on the Curriculum and Report feeders by adding a new feeder, namely the Academy feeder, the voltage drop at the end of the lines does not exceed SPLN standards. The Curriculum feeder is at 2.7%, the Report feeder is at 2.06%, and the Academy feeder is at 1.4%.

Keywords

Inverter Dua Arah Hybrid, Energi Alternatif, PLTS, Rumah Tangga.

Full Text:

References

SPLN 70-4 PT. PLN (Persero). 1992. KHA Kabel Pilin Tegangan Rendah..

Hamles Leonardo Latupeirissa. JURNAL SIMETRIK VOL 7, NO. 2, DESEMBER 2017 PENGARUH KETIDAKSEIMBANGAN BEBAN TERHADAP ARUS NETRAL DAN LOSSES DAYA PADA TRAFO DISTRIBUSI GARDU KP-01 DESA HATIVE KECIL. Dari https://ejournal-polnam.ac.id/index.php/JurnalSimetrik/article/view/43/4

SNI 0225:2011/AMD 1 : 2013 Persyaratan Umum Instalasi Listrik 2011 (PUIL 2011) AMANDEMEN 1 dari https://maryonoam.wordpress.com/wp-content/uploads/2017/01/sni-puil-2011-amandemen-bagian-5-52-dan-bagian-7.pdf

ANALISIS DROP TEGANGAN PADA JARINGAN TEGANGAN RENDAH PT. PLN (Persero) ULP KUTACANE dari https://eprints.pancabudi.ac.id/id/eprint/56/1/ARIOLA.pdf

ANALISA PERBAIKAN DROP TEGANGAN JTR DENGAN MENGGUNAKAN METODE TRAFO SISIP DAN UPRATING KABEL BERBASISSIMULASI ETAP 12.6.0 DI PT. PLN (PERSERO) UP3 LUBUK PAKAM ULP PERBAUNGAN. Dari https://eprints.pancabudi.ac.id/id/eprint/20/1/AHMAD%20%20ZULFADLI.pdf

SPLN 72 : 1982 PT. PLN (Persero). SPESIFIKASI DESAIN. UNTUK. JARINGAN TEGANGAN MENENGAH (JTM) DAN JARINGAN TEGANGAN RENDAH (JTR).

DOI: https://doi.org/10.30591/polektro.v13i2.6849

DOI (PDF): https://doi.org/10.30591/polektro.v13i2.6849.g2998