IMPLEMENTATION OF ULTRASONIC SENSOR HCSR04 BASED ON Arduino UNO AS A SOCIAL DISTANCE TOOL IN THE NEW NORMAL ERA
Abstract
Abstract This study aims to design and construct an Arduino- based HC-Sr04 Ultrasonic sensor in reducing the spread of Covid- 19 in this new normal era. The ultrasonic sensor will be used as a device that can detect the presence of object in front of it by utilizing ultrasonic waves emitted by the transmitter on the sensor. Through these advantages, the device is used as a warning medium to keep a distance according to the Covid-19 prevention protocol in the new normal era. As is often campaigned, social distancing is one of the efforts that greatly affects the spread of the corona virus, so that through the design and implementation of this system, it is hoped that this can be achieved. In the research process, an ultrasonic sensor is used to measure distance, then the data will be sent to Arduino as the microcontroller or brain of this system. Simply put, when the object approaches the sensor at a predetermined distance limit, Arduino will process the data and then immediately give a command to activate the buzzer. The results of the research carried out are a product of automatic distance limiting technology using the HC-Sr04 ultrasonic sensor based on Arduino Uno which of course can provide benefits, especially in a pandemic situation like today.
Keywords: Ultrasonic HC Sr 04, Arduino, Covid-19, New Normal
Keywords
References
Philips Vermonte and Teguh Y. Wicaksono, “Karakteristik dan Persebaran COVID-19 di Indonesia: Temuan Awal,” CSIS Commentaries. 09-Apr-2020.
Tuti Khotimah and Darsin, “Clustering Perkembangan Kasus Covid-19 di Indonesia Menggunakan Self Organizing Map,” Jurnal Dialektika Informatika (Detika), vol. 1, no. 1, pp. 23 – 26, November 2020.
Dipna Videlia Putsanra, “Syarat New Normal dari WHO: Negara Sudah Mampu Kendalikan Covid-19,” tirto.id, [Online]. Available: http://tirto.id/syarat-new-normal-dari-who-negara-suah-mampu-kendalikan-covid-19-fDnC.
I. Y. Lonteng, Gunawan & Isa Rosita, “Rancang Bangun Simulasi Alat Pendeteksi Jarak Aman Antar Kendaraan Menggunakan Sensor Ultrasonik Berbasis Arduino,” JEECOM, vol. 2, no. 2, pp. 22 – 26, Oktober 2020.
R. Muzawi, Y. Efendi and Unang Rio, Prototype Alat Physical Distancing Covid-19 Menggunakan Arduino Uno,” JOISIE Journal Of Information System And Informatics Engineering, vol. 4, no. 2, pp. 121 – 127, Desember 2020.
A. Kadir, Panduan Praktis Mempelajari Aplikasi Mikrokontroler dan Pemrogramannya Menggunakan Arduino,” Andi, Yogyakarta, 2013.
H. Pratomo, From Social Distancing To Physical Distancing: A Challenge For Evaluating Public Health Interventions Against COVID-19,” Kesmas: Jurnal Kesehatan Masyarakat Nasional, Special Issue 1, pp. 60 – 63, 2020.
F. Puspasari, I. Fahrurrozi, T. P. Satya, ang G. Setyawan, “Sensor Ultrasonik HCSR04 Berbasis Arduino Due untuk sistem Monitoring Ketinggian,” Jurnal Fisika dan Aplikasinya, vol. 15, no. 2, pp. 36 – 39, 2019.
R. Muzawi, “Prototype Kacamata Pemandu Bagi Tunanetra Dengan Keterbatasan Pengkihatan,” SATIN: Sains Dan Teknologi Informasi, vol. 6, no. 1, pp. 1 – 3, 2016.
DOI: https://doi.org/10.30591/polektro.v11i1.2616
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
----------------------------------------------------------------------------------------------------------------------
Indexed By :
 |  |  |  |
 |  |  |  |
----------------------------------------------------------------------------------------------------------------------
Tim Redaksi POWER ELEKTRONIK : JURNAL ORANG ELEKTRO
Program Studi D3 Teknik Elektro
Politeknik Harapan Bersama Tegal
Jl. Mataram No.09 Pesurungan Lor Kota Tegal
Telp. (0283) 350567
Email :
[email protected]
