PRODUKSI INTAKE MANIFOLD DUAL PORT INJECTION MENGGUNAKAN PRINTER 3 DIMENSI SEBAGAI INPUT BAHAN BAKAR TERBARUKAN

Abstract

The development of technology at this time has experienced very rapid progress, one of which is 3D printing technology or also known as additive manufacturing. The data analysis method for the production of dual port injection intake manifold using a 3-dimensional printer, which starts from preparing tools and materials and making or printing the intake manifold dual port injection workpiece using a 3-dimensional printer, then measuring the dimensions of the workpiece print using vernier caliver whether it is in accordance with the design. Steps that must be done in order to be able to carry out the data slicing process in the Slicer software. After everything is done, check and measure whether it is in accordance with the design or not, if it is appropriate, the process is complete. The first step to make the Intake Manifold Dual Port Injection using a 3-dimensional printer is to design the solidwork 2022 software, then save the part file with STL format after that slice the creality slicer software with variable print speed 80mm/s with nozzle temperature 230°C and bed temperature 110°C after slicing then save the slice result in g-code format to SD card then print to Ender 3D Print machine